Industrial Steel Buildings – Ph: 0425 230 866 or 1300 851 038
Professional Choice Sheds® – Farm, Rural or Small Business Industrial Steel Buildings (all available as solar ready)
Industrial Steel Buildings
Looking for something for your farm or small business? Design your own building with our help to your exact specifications; no need to settle for alterations to existing designs. We can supply any industrial steel building up to 22m x 40m. We can even supply a mezzanine floor for your workshop and all structures are strong enough to take the weight of additional lining.
These are The Professional’s Choice – The best and strongest available in Australia and one of the few in Australia truly built to Australian Standards!
Do you have a quote? Why not check it against the independent Shed Test?
Don’t lose out on a business Insurance Claim because you’ve been duped!
Don’t ever be in a position in your business where an insurance claim is turned down because your building certification is proved to be wrong!
This will never happen with Professional Choice but it is highly likely to happen in the near future with most other buildings on offer in Australia. The shed test will make it easy for insurance companies to “test’ your building!
Start thinking now – Over 43 different choices!
You have over 43 choices and accessories with Professional Choice Sheds® from the obvious – dimensions and colour – to solar ready and mezzanines. Have a look at your shed guide by clicking here for some further ideas!
Fully Customisable to your design
Industrial Steel Buildings
Customisable to the millimetre. You can use Zincalume or all Colorbond colours, add translucent or transparent roof sheets, PA Doors, Windows, Whirlybirds, Insulation, etc.
Whether it is a large shed or a small industrial building, our design principles are the same. You are guaranteed to be supplied with a building that will be Australian Standard approved and we will give you the specifications to prove it.
Test your quote from your supplier – Industrial Steel Buildings
From any quote, you can easily check if it is truly up to Australian Standard simply by comparing what you are being offered to what you actually need and want at the independent site www.shedhealthcheck.com.au
We guarantee our products are all made with high quality Australian steel. Did you know that imported steel of the same gauge, looks similar and feels similar, can be less than half the strength of the Australian equivalent high tensile steel?
Australia will test your industrial steel building!
Fire, Flood and Wind are the three weather conditions all Australian must consider. We can absolutely guarantee Professional Choice against any wind conditions. In most cases, it is highly likely your Professional Choice structure will withstand the ravages of flood. Finding steel that will not distort and bend in the heat of an Australian bush fire is still beyond even Professional Choice.
The Professional Choice Sheds® differences – Industrial Steel Buildings
Accredited & National Construction Code (NCC) Compliant – Is your shed or carport really NCC compliant?
It’s probably ‘Australian made” or maybe just “Australian assembled” but NOT with Australian steel!
It may be sold with an Australian certification but very few are compliant with the Australian Standards.
Developing solar ready carports and sheds has cast doubt on many steel structures being sold and installed in Australia. Investing in a carport or shed you should know you’re getting a quality steel building.
If you already have a quote for your new steel building, we strongly recommend that you check the engineering here at this independent site shedhealthtest.com.au. Unless its Professional Choice Sheds®, you will almost certainly find that your choice is not up to Australian standards.
Get Started now – Over 43 Choices
You have over 43 choices and accessories with Professional Choice Sheds® from the obvious – dimensions and colour – to solar ready and mezzanines. Have a look at your shed guide by clicking here for some further ideas!
Notes Inclusions/sizes – Doors and Windows
- All sheds/garages must have at least 1 full wall
- All garage/gara-ports must have a minimum of one (1) full wall
- Minimum size is 2.5m x 2.5m
- Maximum size is 22m for Region A, 20m for region B and 18m for region C with a length up to 40 metres.
- Maximum span is normally 7m.
- AMIA windows will be supplied
- Gliderol is the standard roller door although B&D can be supplied on request.
- PA doors are by Larnec
Further information on Industrial buildings and their strength and quality – what you must expect from every supplier – can be found on our sheds, garages and workshops page here.
Sample proposal for small Industrial Building
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image